- Home
- All APIs
- Worldpay Total
- IPC Release Notes
IPC Release Notes
This section contains details of IPC releases.
Features in IPC 2 v -2.2.9
The new features and enhancements included in this release are as follows: -
Enhancements
1. Support Alipay Barcode Transactions
Added support for Alipay Barcode Transactions mainly with Merchant Scan using Barcode.
Supported Alipay Transactions: a) Sale with Additional Authentication/Password. b) Sale without Additional Authentication/Password. c) Refund d) Cancel e) Query Request – This will be called internally based upon the response from Alipay for a particular Transaction.
Supported PEDs for Alipay Transactions – P400, Vx820, iPP350 and iWL250.
- Supported Country – UK
2. Added support of DCC with Planet using following PEDs:
- Vx820 (VIPA 6.3.2.9) – Germany and Netherlands with Online
- P400 (VIPA 6.6.1.3) – UK and ROI
3. Added support for AVR Transactions
- Supported PEDs : iPP350 & iwl250 (min. RAM version 16.06)
- Supported Countries : UK and ROI
Bug Fixes:
- Provide fix for Incorrect MID and TID combination set up at IPC.
- WPT-409 - INC2182604: Token Refund getting declined offline with Null response.
- WPT-408 - INC2176772: No handling for reversal in case of Preauth txn.
- WPT-407 - INC2161788: Issue with Remove Card Instruction.
- WPT-403 : Merchant dataset downloaded with size 0 kb.
- WPT-397 - INC2134577: Multiple pin entry prompts issue.
- WPT-396 - “Please Remove Card” key to be sent before the completion of ‘EMV Stop Transaction’ command.
- WPT-394 - Issue in printing duplicate receipts for both Merchant/Customer- through iWL250 PED.
- WPT-393 – Interval Connectivity Check Scheduler process running repetitively.
- WPT-383 - INC2074394 :- We have been reported an incident where a transaction failed on the till at the card reading stage.
Open Issue:
There is an issue with Vx820 (VIPA 6329) in Germany with AMEX online PIN, where pinpad displayed “Please enter your PIN” message after displaying “Enter PIN” and “PLEASE WAIT”.
Features in IPC 2 v -2.2.8
Enhancements:
- In IPC the receipt printing is now configurable for IWL250 PinPed’s and it takes the value which is currently present at merchant’s end or the default value will be false.
Bug Fixes:
- During OS upgrade for Miura device from OS >7- 15 version there was an issue with Check Com port error and it was taking 40-50 sec to initialize the Pinped which is now resolved.
Features in IPC 2 v -2.2.6
Enhancements
1) Fixed comport changes: The enhancement is done to limit comport checking to the pre-defined comport if autosensing is disabled.
In the event that IPC is unable to detect the PED on the configured COM port, if auto sensing option is ON then it will allow IPC to attempt to detect the PED on any other valid COM port. If IPC finds a PED on another COM port, it will prompt via the GUI to allow connection via the new COM port, and change the configured com port accordingly. If PED is unable to connect to any of the COM ports, then IPC will not initialise and a pop-up message will be displayed on UI.
If auto sensing option is switched OFF & PED is unable to connect to the pre-defined comport, then other ports will not be iterated for establishing connection and a pop-up message will be displayed on UI.
Windows: Auto sensing option will be switched ON by default. PEDs supported : iPP350, Vx820 and M010
Linux:
a) In case of Linux for Serial/ Symlink Port, autosensing flag will be switched ON by default. User will be able to switch OFF the flag if needed.
b) In case of USB - TTYA CM Port - Autosensing flag will always be switched ON & disabled (greyed out). User will not be able to switch OFF the flag if needed.
c) PEDs supported: iPP350 and Vx820
Messages:
| PEDs/Scenario | Autosensing is disabled & PED is unable to connect to the fixed comport | Autosensing is enabled & PED tries to connect to different ports apart from the fixed port | Autosensing is enabled & PED is unable to connect to any of the ports |
|---|---|---|---|
| Vx820 - UI | Unable to connect to PED on COM port COM x. Please check COM port and PED connection | Unable to connect to PED on COM port COM x. Trying for COM port y. | Unable to Initialize IPC. Please check COM port and PED connection |
| Vx820 - Logs | Unable to connect to PED on COM port COM x. Please check COM port and PED connection | Unable to connect to PED on COM port COM x. Trying for COM port y. | Unable to Initialize IPC. Please check COM port and PED connection |
| Vx820 - Port 8000 | Unable to connect to PED on COM port COM x. Please check COM port and PED connection | Unable to connect to PED on COM port COM x. Trying for COM port y. | UnableToInitializeIPC PleaseCheckComport |
| iPP350 - UI | Unable to connect to PED on COM port COM x. Please check COM port and PED connection | Unable to connect to PED on COM port COM x. Trying for COM port y. | Unable to Initialize IPC. Please check COM port and PED connection |
| iPP350 - Logs | Unable to connect to PED on COM port COM x. Please check COM port and PED connection | Unable to connect to PED on COM port COM x. Trying for COM port y. | Unable to Initialize IPC. Please check COM port and PED connection |
| iPP350 - Port 8000 | Unable to connect to PED on COM port COM x. Please check COM port and PED connection | Unable to connect to PED on COM port COM x. Trying for COM port y. | UnableToInitializeIPC PleaseCheckComport |
| M010 - UI | Unable to Initialize Integrated Payment Client. PED is switched off or in Sleep mode. | Unable to connect to PED on COM port COM x. Trying for COM port y. | Unable to Initialize Integrated Payment Client. PED is switched off or in Sleep mode. |
| M010 - Logs | Unable to Initialize Integrated Payment Client. PED is switched off or in Sleep mode. | Unable to connect to PED on COM port COM x. Trying for COM port y. | Unable to Initialize Integrated Payment Client. PED is switched off or in Sleep mode. |
| M010 - Port 8000 | unableToInitializeEVT PEDswitchedoff_OR_SleepMode | Unable to connect to PED on COM port COM x. Trying for COM port y. | unableToInitializeEVT PEDswitchedoff_OR_SleepMode |
Handling of Multiple Instance
In case of multiple instances, autosensing flag will remain switched OFF & disabled (greyed out) for all the instances. The PED will be able to make connection with fixed comport only. If autosensing option is switched OFF & PED is unable to connect to the pre-defined comport, then other ports will not be iterated for establishing connection and a pop-up message will be displayed on UI. Multiple instances are not supported for Linux platform for USB & Symlink Ports. If configured, it may result in an unpredictable behaviour.
2) Automatic Download Functionality
IPC will attempt to download the latest updates once in every 24 hours when available on WPH.
The time at which download will be attempted is given in Merchant Dataset: tag
0150 . If IPC is unable to connect with WPH in the first attempt , it will retry 2 more times in an interval specified in Merchant Data Set : tag10 .Automatic downloads will take place only when PED is not in use.
As part of this release , following functionalities have been added for automatic download feature:
a) Vx820: Language files can be downloaded automatically
b) iWL250: Datasets, properties and software can be downloaded automatically.
3) Support for Amex transactions using Amex ISO 8583 connection for Vx820 PEDs
Amex transactions using Amex ISO 8583 connection are now supported in Germany, Netherlands and Republic of Ireland.
IPC now supports Amex payments in Germany and Netherlands.
IPC will now be able to accept alpha-numeric input values for Address & Post Code for CNP transactions using AMEX BIN ranges.
4) France Changes for VX820 PED
IPC will now support French language with Vx820 PED.
As per the regional requirements in France, IPC will prompt for Signature verification when transaction amount is equal to or greater than 1,500 EUROS. This prompt will be irrespective of the applicable CVM for that card used for the transaction.
For VISA Contactless cards, now IPC will print Application Identifier (AID) on receipts and in OUTPUT.TXT file. This implementation is also available for IPP350 PED.
5) Updated firmware OS version from 7.7 to 7.15 for Miura.
Bug Fixes:
Fixed issue related to Corruption of teminal.properties file.
Fixed issue with Cancel request in intra message mode for keyed and fallback.
Fixed issue wherein IPC started working in offline mode due to corrupted key change related files. An Integrity Checker mechanism has been implemented which will calculate the checksum for jce.BKSkeystore, evtkm.properties and truststore files on the very first initialization and verifies the same on every future initializations.
Fixed issue for Software Upgrade with IPC_AS_A_Service for Service account
Features in IPC 2 v -2.2.5
Enhancements
- IPC taking long time to connect (15-20) seconds, when PED disconnected and re-connected and transaction request is sent. Timeout now reduced to 3 seconds.
- IPC-2 will show UI message “Incorrect PED Selected” when someone is incorrectly selecting PED iPP350 IP from PEDs list in the configuration whereas actually using PED iWL250 IP or vice-versa.
- IPC-2 will now include only those environment configurations which are required by Merchants. The latest supported environment details for IPC-2 are:
| Environment | Countries | Language | Pinpad |
|---|---|---|---|
| POS | UK/ROI | English | iPP350, iWL250, Verifone VX820, Miura |
| POS | France | French | iPP350 |
| POS | Germany | German | iPP350, Verifone VX820 |
| POS | Netherlands | Dutch | Verifone VX820 |
| Semi-Attended | UK | English | iPP350, iWL250, Verifone VX820 |
- IPC-2 will have configurable option for number of yescps.log and terminalintialiser.log files as 20-999.
- IPC-2 will show UI message “PED Battery is low, Cancelling Transaction” when battery percentage of iWL250 PED is below 15% and will cancel the transaction.
- IPC-2 will not display Miura PED in Pin ped list when POS environment is selected on LINUX platform.
- IPC-2 will not display iWL250-IP PED in Pin ped list when Semi-Attended environment is selected on both WINDOWS and LINUX platform.
Enhancements
The new features and enhancements included in this release are as follows:
- Added support for German & Dutch languages with Vx820 PED for PED level internal messages.
- Synched system time with PED which is displayed on PED screen via VIPA-6.3.2.6 firmware.
- Removed blue border displayed around logo on the PED for Vx820 PED with Firmware VIPA-6.3.2.6.
- Synched system date and time with PED which is displayed on PED at the time of IPC initiation for iPP350 PED with RAM-1606.
- For gift card transactions, it will now show two decimal places for remaining balance.
- DCC support is extended to ROI.
Limitation
- Cash-back, DCC, Donation is not supported for all Online-Pin supported Countries.
- Non Decimal currency like JPY is currently displaying in decimal on PIN Entry Screen of PED.
Bug Fixes
- If PED is swapped out then logo image will be injected into PED for Vx820 PED with Firmware VIPA-6.3.2.6.
- IPC-2 will cancel the transaction if transaction reference number is not supplied as part of any input request.
- From July 2018 onwards, the pre-authorisation request works as an actual pre-authorisation with estimated amount for streamline only and for all other acquirers the pre-authorisation works as a normal authorisation. The final amount charge to the customer will be the amount used in Pre Sales Completion Transaction of this Pre-Authorisation.
Enhancements
The new features and enhancements included in this release are as follows:
Vx820-7816 and IPP350 PED: Following features are supported for Linux Platform Only.
- Card Country code and Currency code available in IPC Output Response message. Configured by request in the WPT Central service - switched off by default.
- Support of Terminal Key Recovery Feature for Refunds. This is added to the existing Terminal Key Recovery Feature for Sales. Limitation
- IPC-2-223 Installer is supported for Linux platform only.
- Pin ped connection via USB supported directly in Linux. Previously some merchants were configuring USB connection in Linux via virtual COM ports - this method is no longer supported.
Enhancements
The new features and enhancements included in this release are as follows:
- Added support for Online-PIN in the Germany & Netherlands for Vx820 PED with Firmware VIPA-6.3.2.6.
- Added support for Online-PIN in the Germany for iPP350 with RAM-1606.
- For iPP350 and VX820 PED: Once in 24 hours, IPC will check to emboss for updates on given time and download and install all the available updates (including dataset, properties, software and firmware).
- IPC will support only encrypted PED (iPP350, iWL250, Vx820 and Miura M010).
Limitation - Allowed only Visa & Master card for online-pin.
Enhancements
The new features and enhancements included in this release are as follows: Vx820-7816 PED: Following features are supported for Linux Platform Only.
- Enhanced DCC functionality with VeriFone Vx820 7816.
- Added new transaction type to support Account payment.
- Check card functionality has been extended to Keyed.
- Added Staff card handling for Discount code and Amount.
- Handling of Stand In functionality in Swipe for Staff and Store PLC card.
- Enhanced DCC Feature: Print Card Country code and Currency code in Output.txt for DCC transaction.
- Support of Terminal Key Recovery Feature.
IPC-2 common features
- Added support for PPS gift card transaction.
- Redemption / Sale, Refund, Top-Up and Balance Enquiry transaction types are supported.
- Only Swipe and keyed mode are supported.
- Supported Pin-pads: IPP350, IWl250, Miura, Vx820 7816, Vx820 US.
- Miura will be in ideal state for all E gift card transaction types. Means any message will not be shown on PED.
- E-gift cards are supported with same features of gift card. Internally it will be processed as keyed rather than ask any confirmation on PED.
- Token will be present in output response for all gift card transactions except Refund.
- Manual reversal will be processed same as Cancel request at IPC end.
- In Output response PGTR field will contain the capture API's PGTR response rather than Auth ID.
- (Note: - As preauth transaction doesn't call capture API so in this case PGTR file will contain authorization PGTR)
- Added Enforced sale functionality for IPP350 PED.
- For IPP350 PED: Once in 24 hours, IPC will check to emboss for updates on given time and download and install all the available updates (dataset and EMV configuration files only).
- Track2 data is added in output response if transaction type is check card and card is whitelisted.
Limitation
- Firmware Upgrade is not supported with Vx820 Linux USB.
Enhancements
The enhancements included in this release are as follows:
Miura PED (M010):
- Increased the connection time-out from 10 seconds to 30 seconds during IPC-2 start-up with Miura PED. These are the messages IPC-2 will keep sending on intra-message port with 5 seconds intervals during start-up:
PED_Connectivity_Msg_1=If PED is switched off or in sleep Mode,PED_Connectivity_Msg_2=Please switch on or press any key on PED.Attempting_Connection=Attempting connection to Miura...
When IPC-2 is able to connect with PED, IPC-2 will send intra-message:Connection_Miura_succeeded=Connection to Miura succeeded - When IPC-2 is configured on intra-message mode and during initialization if IPC-2 is not able to connect with Miura PED, IPC-2 will send intra-message key “Unable to Initialize EVT” and exit. No UI messages send by IPC-2.
- “Select Application” message is changed to “Select Application on PED” in message bundle.
Vx820-7816 PED:
- Contactless mode is supported with check card transaction.
- IPC-2 will return plain PAN number in response of check card transaction when Whitelist range injected in PED and used with whitelist range card.
IPP350 & IWL250 PED:
- IPC-2 will return plain PAN number in response of check card transaction when Whitelist range injected with PED and used with whitelist range card.
- Contactless mode is supported with check card transaction.
- IPC-2 will return plain expiry date if token service is enabled for terminal.
IPC-2 common features
- IPC-2 application will have an additional option to run as windows service.
- PGTR field is optional for refund via token transaction type.
- Added new offline timer configuration for terminal to process transaction in offline mode for configured time when no connectivity with server and IPC will check connection availability on server at configured time period.
- When a chip card is inserted, IPC-2 will send “chipCardInserted” on intra message port.
| Pinpad | iPP350 | iPP350 | iWL250 | Vx820 | Miura - M010 |
|---|---|---|---|---|---|
| Pinpad Firmware version | RAM 9073 | RAM 1606 | RAM 1606 | 6.3.2.3 | 1.43 |
| OS | Windows 7, 8.1, 10. Cent OS 6.1 | Windows 7, 8.1, 10. Cent OS 6.1 | Windows 8-tablet | ||
| Acquirer | Streamline, Barclaycard, Amex | Streamline, Barclaycard, Amex | Streamline, Amex | Streamline, Amex | Streamline, Amex |
| Card Types | Mastercard, Maestro, Visa, Amex, Diner, JCB | ||||
| Countries | 11 digit PGTR supported in UK and US Zero floor limit for contactless transactions Yescpsinterface.exe is no longer available in installer | ||||
| Receipt printing support is made available for msxml 6 | |||||
| Available balance amount will be reflected in receipt and output response field for Flexe cash card | |||||
| Enhancements | Transaction > 1500 Euro prompt for signature (for France) | Transaction > 1500 Euro prompt for signature (for France) | Transaction > 1500 Euro prompt for signature (for France) | Semi-attendant mode AMEX contactless and CNP support All cashback transactions go for online auth | AMEX contactless, for AMEX mag stripe after tapping Miura will prompt for swipe/insert 20s to cancel transaction |
| Bug Fixes | Fixed cancelled transaction issue Screensaver always shows even after restart Contactless transactions will be approved inspite of delayed PED response | Fixed cancelled transaction issue Screensaver always shows even after restart Contactless transactions will be approved inspite of delayed PED response | Fixed cancelled transaction issue Screensaver always shows even after restart Contactless transactions will be approved inspite of delayed PED response | Reduced timeout time | |
| Problems (Retrospective) | |||||
| Limitations? | |||||
| CP Sale | Y | Y | Y | Y | Y |
| CNP Sale | Y | Y | Y | Y | Y |
| CNP Sale AMEX (4 dig. CVV) | N | Y | Y | Y | N |
| CP Refund | Y | Y | Y | Y | Y |
| CNP Refund | Y | Y | Y | N | |
| Cancellation | Y | Y | Y | Y | |
| HVC | N | Y | Y | Y | Y |
| HVC AMEX | N | Y | Y | Y | Y |
| Contactless AMEX | N | Y | Y | Y | Y |
| Contactless | Y | Y | Y | Y | Y |
| Cashback | Y | Y | Y | Y | Y |
| Pre Auth | Y | Y | Y | Y | N |
| Sale with gratuity | Y | Y | Y | Y | Y |
| PCI P2PE | Y | Y | Y | Y | Y |
| Gift cards | Y | Y | Y | Y | Y |
| Intra Message Port | Y | Y | Y | Y | Y |
| IMP + "Remove Card" Message (IP PEDS only) | Y | Y | Y | Y | Y |
| Completion | Y | Y | Y | Y | Y |
| Tokenisation | Y | Y | Y | Y | Y |
| Cross Tokenisation | N | N | N | N | N |
| DCC | N | N | N | N | N |
| Pennies | Y | Y | Y | Y | Y |
| Pennies Contactless | Y | Y | Y | Y | Y |
| Apple Pay | Y | Y | Y | Y | Y |
| Android Pay | Y | Y | Y | Y | Y |
| Auto Upgrade | |||||
| PED Firmware Upgrade | 6.2.3.2 | ||||
| Timeout Configuration | 20s | 20s | 20s | 20s | 20s Sleep timeout 10 minutes |
| Proxy Setting | |||||
| Client Log Configuration | |||||
| JAVA Finder | |||||
| Offline Transaction Processing |
| Pinpad | iPP350 | iPP350 | iWL250 | Vx820 | Miura - M010 |
|---|---|---|---|---|---|
| Pinpad Firmware version | RAM0973 | RAM 1606 | RAM 1606 | 4.0.5.6 | 1.43 |
| OS | Windows 7, 8.1, 10. Cent OS 6.1 | Windows 7, 8.1, 10. Cent OS 6.1 | Windows 8-tablet | ||
| Acquirer | Streamline, Barclaycard, Amex | Streamline, Barclaycard, Amex | Streamline, Amex | Streamline, Amex | Streamline, Amex |
| Card Types | Visa, MasterCard, Maestro, Diners, Discovery, Amex, JCB | Visa, MasterCard, Maestro, Diners, Discovery, Amex, JCB | Visa, MasterCard, Maestro, Diners, Discovery, Amex, JCB | Visa, MasterCard, Maestro, Diners, Discovery, Amex, JCB | Mastercard, Maestro, Visa, Amex, Diner, JCB |
| Countries | UK, ROI, France | UK, ROI, France | UK, ROI (only with streamline acquriring) | ||
| Enhancements | AMEX contactless support | ||||
| AMEX High Value Contactless support | |||||
| AMEX CNP support with four digit CVV | |||||
| PCI P2PE designated changes to add Ingenico iWL250 portable handset | |||||
| ‘Remove Card’ message for IP based PEDs | |||||
| Support for iWL250 PEDs with RAM 1606 firmware for Streamline Merchant Services acquirers in ROI | |||||
| Bug Fixes | Receipt will now always be printed for ‘Chip and Signature’ cards transactions Receipts working correctly for charge wallets X report works correctly | Receipt will now always be printed for ‘Chip and Signature’ cards transactions Receipts working correctly for charge wallets X report works correctly | Receipt will now always be printed for ‘Chip and Signature’ cards transactions Receipts working correctly for charge wallets X report works correctly | Cashback transactions work correctly Receipt will now always be printed for ‘Chip and Signature’ cards transactions Receipts working correctly for charge wallets X report works correctly | Receipt will now always be printed for ‘Chip and Signature’ cards transactions Receipts working correctly for charge wallets X report works correctly |
| Problems (Retrospective) | Cancelling a transaction, causes the next CNP transaction to be cancelled too Screen saver not loading on restart of till If PED response is delayed, contactless transactions are cancelled randomly | Cancelling a transaction, causes the next CNP transaction to be cancelled too Screen saver not loading on restart of till If PED response is delayed, contactless transactions are cancelled randomly | Cancelling a transaction, causes the next CNP transaction to be cancelled too Screen saver not loading on restart of till If PED response is delayed, contactless transactions are cancelled randomly | IPC taking too long to cancel transaction when waiting for connection to IPC | |
| Limitations? | Java > 1.8 | Java > 1.8 | Java > 1.8 | Java > 1.8 | |
| CP Sale | Y | Y | Y | Y | Y |
| CNP Sale | Y | Y | Y | Y | Y |
| CNP Sale AMEX (4 dig. CVV) | N | Y | Y | N | N |
| CP Refund | Y | Y | Y | Y | Y |
| CNP Refund | Y | Y | Y | Y | N |
| Cancellation | Y | Y | Y | Y | Y |
| HVC | N | Y | Y | Y | Y |
| HVC AMEX | N | Y | Y | N | N |
| Contactless AMEX | N | Y | Y | N | N |
| Contactless | Y | Y | Y | Y | Y |
| Cashback | Y | Y | Y | Y | Y |
| Pre Auth | Y | Y | Y | Y | N |
| Sale with gratuity | Y | Y | Y | Y | Y |
| PCI P2PE | Y | Y | Y | Y | Y |
| Gift cards | Y | Y | Y | Y | Y |
| Intra Message Port | Y | Y | Y | Y | Y |
| IMP + "Remove Card" Message (IP PEDS only) | |||||
| Completion | Y | Y | Y | Y | Y |
| Tokenisation | Y | Y | Y | Y | Y |
| Cross Tokenisation | |||||
| DCC | |||||
| Pennies | Y | Y | Y | Y | Y |
| Pennies Contactless | Y | Y | Y | Y | Y |
| Apple Pay | Y | Y | Y | Y | Y |
| Android Pay | Y | Y | Y | Y | Y |
| Auto Upgrade | |||||
| PED Firmware Upgrade | 4.0.5.7 | ||||
| Timeout Configuration | 20s | 20s | 20s | 20s | 4 min |
| Proxy Setting | |||||
| Client Log Configuration | |||||
| JAVA Finder | |||||
| Offline Transaction Processing |
| Pinpad | iPP350 | iPP350 | iWL250 | Vx820 | Miura - M010 |
|---|---|---|---|---|---|
| Pinpad Firmware version | RAM0973 | RAM 1606 | RAM 1606 | 4.0.5.6 | 1.43 |
| OS | Windows 7, 8.1, 10. Cent OS 6.1 | Windows 7, 8.1, 10. Cent OS 6.1 | Windows 7, 8.1, 10. Cent OS 6.1 | Windows 8-tablet | |
| Acquirer | Streamline, Amex, Barclaycard | Streamline, Amex, Barclaycard | Streamline | Streamline, Amex | |
| Card Types | Mastercard, Maestro, Visa, Amex, Diner, JCB | ||||
| Countries | UK, ROI, France (only Streamline acquiring) | UK, ROI, France (only Streamline acquiring) | UK, ROI | ||
| Enhancements | IPC will set system's current date and time on iWL250 when IPC restarts | Pennies | |||
| Bug Fixes | Only 20s to receive response (<4min) then processes the transaction offline No longer prompts for print customer receipt when feature is disabled in IPC Custom messages through intramessage port | Only 20s to receive response (<4min) then processes the transaction offline No longer prompts for print customer receipt when feature is disabled in IPC Custom messages through intramessage port | Only 20s to receive response (<4min) then processes the transaction offline No longer prompts for print customer receipt when feature is disabled in IPC Custom messages through intramessage port | Only 20s to receive response (<4min) then processes the transaction offline No longer prompts for print customer receipt when feature is disabled in IPC Custom messages through intramessage port | Offline capture request sent through PIN OK message always followed by processing Pressing multiple keys will not decline the transaction Contactless sensitivity lowered Battery icon shows IPC and Miura message displayed faster after POS request |
| Problems (Retrospective) | X report errors in transaction count Receipt not printing when signature required if receipts de-activated in IPC Void receipts with charge wallets | X report errors in transaction count Receipt not printing when signature required if receipts de-activated in IPC Void receipts with charge wallets | Cashback transactions declined | ||
| Limitations? | Java > 1.8 | Java > 1.8 | Java > 1.8 | Java > 1.8 | |
| CP Sale | Y | Y | Y | Y | Y |
| CNP Sale | Y | Y | Y | Y | Y |
| CNP Sale AMEX (4 dig. CVV) | N | N | N | N | N |
| CP Refund | Y | Y | Y | Y | Y |
| CNP Refund | Y | Y | Y | Y | N |
| Cancellation | Y | Y | Y | Y | Y |
| HVC | N | N | N | N | N |
| HVC AMEX | N | N | N | N | N |
| Contactless AMEX | N | N | N | N | N |
| Contactless | Y | Y | Y | Y | Y |
| Cashback | Y | Y | Y | N | N |
| Pre Auth | Y | Y | Y | Y | N |
| Sale with gratuity | Y | Y | Y | Y | Y |
| PCI P2PE | N | Y | Y | Y | N |
| Gift cards | N | N | N | N | N |
| Intra Message Port | Y | Y | Y | Y | |
| IMP + "Remove Card" Message (IP PEDS only) | Y | Y | Y | Y | N |
| Completion | |||||
| Tokenisation | Y (fixed for referred transactions) | Y (fixed for referred transactions) | Y (fixed for referred transactions) | Y (fixed for referred transactions) | Y (fixed for referred transactions) |
| Cross Tokenisation | N | N | N | N | N |
| DCC | N | N | N | N | N |
| Pennies | Y | Y | Y | Y | Y |
| Pennies Contactless | Y | Y | Y | Y | Y |
| Apple Pay | Y | Y | Y | Y | Y |
| Android Pay | Y | Y | Y | Y | Y |
| Auto Upgrade | |||||
| PED Firmware Upgrade | |||||
| Timeout Configuration | 20s | 20s | 20s | 20s | 4 min |
| Proxy Setting | |||||
| Client Log Configuration | |||||
| JAVA Finder | |||||
| Offline Transaction Processing | Y | Y | Y | Y |
| Pinpad | iPP350 | iPP350 | iWL250 | iWL250 | Vx820 | Miura - M010 |
|---|---|---|---|---|---|---|
| Pinpad Firmware version | RAM0973 | RAM1606 | RAM0973 | RAM1606 | VIPA 6.0 | 1.43 |
| OS | Windows 7, 8.1, 10. Cent OS 6.1 | Windows 7, 8.1, 10. Cent OS 6.1 | Windows 7, 8.1, 10. Cent OS 6.1 | Windows 7, 8.1, 10. Cent OS 6.1 | Windows 7, 8.1, 10. Cent OS 6.1 | Windows 8-tablet |
| Acquirer | Streamline, Amex | Streamline, Amex | Streamline | Streamline | Streamline, Amex | |
| Card Types | Flexi mag stripe (Not CNP) | |||||
| Countries | UK, ROI, France (only Streamline acquiring) | UK, ROI, France (only Streamline acquiring) | UK, ROI | UK, ROI | UK | UK |
| Enhancements | Pennies and pennies contactless | Pennies and pennies contactless | Pennies and pennies contactless | Pennies and pennies contactless | Pennies and pennies contactless Flexi-Cash Mag Stripe cards | |
| Bug Fixes | Prompt for card removal Token sent to POS when transaction is referred | Prompt for card removal Token sent to POS when transaction is referred | Token sent to POS when transaction is referred | Token sent to POS when transaction is referred | Token sent to POS when transaction is referred Fixed message for Contactless transactions | Token sent to merchant POS when transaction is referred |
| Problems (Retrospective) | Freezing when transaction request is sent for authorisation to server and transaction timed out after 4 minutes | Freezing when transaction request is sent for authorisation to server and transaction timed out after 4 minutes | Freezing when transaction request is sent for authorisation to server and transaction timed out after 4 minutes Prompts for print receipt when IPC is set not to | Freezing when transaction request is sent for authorisation to server and transaction timed out after 4 minutes Prompts for print receipt when IPC is set not to | Freezing when transaction request is sent for authorisation to server and transaction timed out after 4 minutes | IPC freezing, on PIN OK Delayed response message after POS sends request Offline transactions randomly not sending capture request Pressing keys multiple times causing decline of transactions Contactless card entered into PED is processed as contactless due to high sensitivity |
| Limitations? | No pennies support No HVC | |||||
| CP Sale | Y | Y | Y | Y | Y | Y |
| CNP Sale | Y | Y | Y | Y | Y | Y |
| CNP Sale AMEX (4 dig. CVV) | N | N | N | N | N | N |
| CP Refund | Y | Y | Y | Y | Y | Y |
| CNP Refund | Y | Y | Y | Y | Y | Y |
| Cancellation | Y | Y | Y | Y | Y | Y |
| HVC | N | Y | N | Y (only with Streamline acquiring) | N | N |
| HVC AMEX | N | N | N | N | N | N |
| Contactless AMEX | N | N | N | N | N | Y |
| Contactless | Y | Y | Y | Y | Y | Y |
| Cashback | Y | Y | Y | Y | Y | Y |
| Pre Auth | Y | Y | Y | Y | Y | Y |
| Sale with gratuity | Y | Y | Y | Y | Y | Y |
| PCI P2PE | N | N | Y | Y | Y | N |
| Gift cards | Y | Y | Y | Y | Y | Y |
| Intra Message Port | Y | Y | Y | Y | Y | Y |
| IMP + "Remove Card" Message (IP PEDS only) | Y (USB/SERIAL ONLY) | Y (USB/SERIAL ONLY) | N | N | N | N |
| Completion | Y | Y | Y | Y | Y | Y |
| Tokenisation | Y (fixed for referred transactions) | Y (fixed for referred transactions) | Y (fixed for referred transactions) | Y (fixed for referred transactions) | Y (fixed for referred transactions) | Y (fixed for referred transactions) |
| Cross Tokenisation | N | N | N | N | N | N |
| DCC | N | N | N | N | N | N |
| Pennies | Y | Y | Y | Y | Y | N |
| Pennies Contactless | Y | Y | Y | Y | Y | N |
| Apple Pay | Y | Y | Y | Y | Y | Y |
| Android Pay | Y | Y | Y | Y | Y | Y |
| Auto Upgrade | ||||||
| PED Firmware Upgrade | Y (0973->1606) | Y (0973->1606) | Y (0973->1606) | Y (0973->1606) | Y (0973->1606) | n/a |
| Timeout Configuration | 4 min | 4 min | 4 min | 4 min | 4 min | 4 min |
| Proxy Setting | ||||||
| Client Log Configuration | ||||||
| JAVA Finder | ||||||
| Offline Transaction Processing | Y | Y | Y | Y | Y | Y |
| Pinpad | Miura - M010 |
|---|---|
| Pinpad Firmware version | 1.43 |
| Pinpad OS Version | 7.7 |
| OS | Windows-8 Tablet |
| Acquirer | Streamline, Amex |
| Card Types | Contact chip , Mag-stripe, Contactless (Visa Paywave and Mastercard Paypass) |
| Countries | UK |
| Enhancements | |
| Bug Fixes | |
| Problems (Retrospective) | |
| Limitations? | |
| CP Sale | Y |
| CNP Sale | Y |
| CNP Sale AMEX (4 dig. CVV) | N |
| CP Refund | Y |
| CNP Refund | Y |
| Cancellation | |
| HVC | N |
| HVC AMEX | N |
| Contactless AMEX | N |
| Contactless | Y |
| Cashback | N |
| Pre Auth | N |
| Sale with gratuity | Y |
| PCI P2PE | N |
| Gift cards | Y |
| Intra Message Port | Y |
| IMP + "Remove Card" Message (IP PEDS only) | N |
| Completion | N |
| Tokenisation | N |
| Cross Tokenisation | N |
| DCC | N |
| Pennies | N |
| Pennies Contactless | N |
| Apple Pay | Y |
| Android Pay | Y |
| Auto Upgrade | |
| PED Firmware Upgrade | |
| Timeout Configuration | |
| Proxy Setting | |
| Client Log Configuration | |
| JAVA Finder | |
| Offline Transaction Processing | Y |
| Pinpad | iPP350 | iPP350 | iWL250 | iWL250 | Vx820 |
|---|---|---|---|---|---|
| Pinpad Firmware version | RAM0973 | RAM1606 | RAM1606 | RAM0973 | VIPA 4.0.5.6 |
| OS | |||||
| Acquirer | Streamline, Amex | Streamline, Barclaycard, Amex | Streamline, Amex | Streamline, Amex | Streamline, Amex |
| Card Types | |||||
| Countries | |||||
| Enhancements | Support for both Streamline and Barclaycard Merchant Services acquirers | High Value Contactless (HVC) support with Streamline acquirer | Merchant logo | ||
| Bug Fixes | A change has been done on IPC to send declined response capture request to server in case of referral transaction is declined by customer If EMV file download fails, IPC will now attempt 3 times IPC will always send output response to POS application to avoid freezing issue IPC can correctly locate file paths | ||||
| Problems (Retrospective) | Problems with P2PE due to no capture | ||||
| Limitations? | Streamline & Amex are the only possible acquirers. No HVC | ||||
| CP Sale | Y | Y | Y | Y | Y |
| CNP Sale | Y | Y | Y | Y | Y |
| CNP Sale AMEX (4 dig. CVV) | N | N | N | N | N |
| CP Refund | Y | Y | Y | Y | Y |
| CNP Refund | Y | Y | N | N | Y |
| Cancellation | Y | Y | Y | Y | Y |
| HVC | N | Y | Y (only with Streamline acquiring) | N | Y |
| HVC AMEX | N | N | N | N | N |
| Contactless AMEX | N | N | N | N | N |
| Contactless | Y | Y | Y | Y | Y |
| Cashback | Y | Y | Y | Y | Y |
| Pre Auth | Y | Y | Y | Y | |
| Sale with gratuity | Y | Y | |||
| PCI P2PE | Y (SRED enabled) | Y (SRED enabled) | Y (SRED enabled) | Y (SRED enabled) | Y (SRED enabled) Decryption issues. |
| Gift cards | Y | Y | Y | Y | Y |
| Intra Message Port | Y | Y | Y | Y | Y |
| IMP + "Remove Card" Message (IP PEDS only) | N | N | N | N | N |
| Completion | Y | Y | Y | Y | |
| Tokenisation | N | N | N | N | |
| Cross Tokenisation | N | N | N | N | |
| DCC | N | N | N | N | |
| Pennies | Y | N | N | N | |
| Pennies Contactless | N | N | N | N | |
| Apple Pay | Y | Y | |||
| Android Pay | Y | Y | |||
| Auto Upgrade | |||||
| PED Firmware Upgrade | Y (0520->0973) | Y (0973->1606) | Y (0520->0973) | Y (0520->0973) | |
| Timeout Configuration | |||||
| Proxy Setting | |||||
| Client Log Configuration | |||||
| JAVA Finder | |||||
| Offline Transaction Processing |
| Pinpad | iPP350 | iWL250 | Vx820 |
|---|---|---|---|
| Pinpad Firmware version | RAM0973 | RAM0973 | VIPA 4.0.5.6 |
| OS | |||
| Acquirer | |||
| Card Types | |||
| Countries | |||
| Enhancements | |||
| Bug Fixes | Doesn’t prompt for cash back when using internationally Re-prompt to insert/swipe card if customer swipes a chip card IPC will send “Receipt Number” in charge wallet refund request to server IPC will not print key change data on command prompt | Doesn’t prompt for cashback when using internationally Re-prompt to insert/swipe card if customer swipes a chip card IPC will send “Receipt Number” in Charge wallet refund request to server IPC will not print key change data on command prompt | Doesn’t prompt for cashback when using internationally IPC will send correct pin pad tracking number (PTID number) on P2PE request IPC will send “Receipt Number” in Charge wallet refund request to server IPC will not print key change data on command prompt |
| Problems (Retrospective) | IPC does not retry downloading EMV file from sever if downloading fails on the first attempt IPC wasn’t always sending an output request IPC was not able to upgrade software on following configuration due to failure to locate correct path for files IPC was failing to upload the transaction log file on server | ||
| Limitations? | |||
| CP Sale | Y | Y | Y |
| CNP Sale | Y | Y | Y |
| CNP Sale AMEX (4 dig. CVV) | N | N | N |
| CP Refund | Y | Y | Y |
| CNP Refund | Y | N | Y |
| Cancellation | Y | Y | Y |
| HVC | Y | N | Y |
| HVC AMEX | N | N | N |
| Contactless AMEX | N | N | N |
| Contactless | Y | N | Y |
| Cashback | Y | Y | Y |
| Pre Auth | Y | Y | Y |
| Sale with gratuity | Y | N | |
| PCI P2PE | Y (SRED enabled) | N | Y (SRED enabled) |
| Gift cards | |||
| Intra Message Port | Y | Y | Y |
| IMP + "Remove Card" Message (IP PEDS only) | |||
| Completion | Y | Y | Y |
| Tokenisation | N | N | N |
| Cross Tokenisation | N | N | N |
| DCC | N | N | N |
| Pennies | Y | N | N |
| Pennies Contactless | N | N | N |
| Apple Pay | Y | Y | |
| Android Pay | Y | Y | |
| Auto Upgrade | |||
| PED Firmware Upgrade | Y (0520->0973) | Y (0520->0973) | |
| Timeout Configuration | |||
| Proxy Setting | |||
| Client Log Configuration | |||
| JAVA Finder | |||
| Offline Transaction Processing | |||
| Merchant Image on PED | Y | Y |
